|
|
|
|
||||||||||||||||||
|
||||||||||||||||||||
Inverters and Accessories
from
OutBack Power Systems!
"At
Solar Taos, LLC we have
been living and running our woodshop with clean,
reliable electric made by the
sun
and
Wind
for over Two decades and we love it and we know you will too!"
|
||||||||||
are the next
generation in advanced power management. Each is a
DC to AC sinewave inverter, battery charger and AC
transfer switch housed within a tough die-cast
aluminum chassis.
Vented Inverter/Chargers
The VFX series is designed for more protected installations. By utilizing an efficient active cooling design, the VFX models are available with AC output up to 3.6 kilowatts.
The tough diecast aluminum chassis physically protects the internal components while the air intake includes an easily cleaned filter, which allows for ventilation while also keeping bugs and other debris out.
All circuit boards are conformal coated to prevent corrosion from airborne moisture in humid conditions. The now standard DC wiring cover (DCC) protects the DC terminals and battery cables from damage.
| GTFX INVERTERS (OutBack's statement on Grid-Tie) | ||
 |
Designed for either stand-alone or utility-interactive applications, OutBack's new generation of power inverter is rated from 2000 watts to a continuous output of up to 3600 wsatts depending on the model. Each GTFX inverter/charger is a complete power conversion system, comprising a DC to AC inverter, a battery charger and an AC transfer switch. OutBack gives you the flexibility to design your system to meet any specific power requirement. Up to eight GTFXs can be connected (stacked) in a variety of series/parallel configurations for 120 VAC, 240 VAC (split phase) or 120 & 208 VAC (three phase) output for a total of 16,000 watts of AC power! A 50 Hz export version is available for 230 VAC or 230 & 400 VAC (three phase) applications. The GTFX is designed to survive the most difficult environments. The unique die-cast aluminum chassis functions as a heat exchanger to cool the sensitive electronics without the need to circulate outside air through the inverter. The die-cast aluminum case is gasketed and completely sealed against moisture intrusion and is impervious to the most tenacious earthbound life forms thus eliminating most of the major causes of inverter failure. The GTFX is also available in a "vented" version that can be used in high ambient temperatures to 60°C without reduced output ratings. Outback offers sealed AND vented inverter/chargers -- More Info. |
|
| GVFX INVERTERS (OutBack's statement on Grid-Tie) | ||
 |
The OutBack GVFX series is a ventilated version of our original sealed FX series modular "building block” sine wave inverter/charger that can be used for both small and large power systems. By allowing cooler outside airflow through the internal electronics, more AC power is available and operation in extremely hot environments is improved compared to the sealed FX series. Each OutBack GTFX or GVFX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional GVFX inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. The OutBack VFX series is also available in export versions with 230 VAC, 50 hz output that can be connected in parallel (230 VAC) or in three phase (230Y400 VAC) configurations. Like the GTFX series, the OutBack GVFX is also designed to survive harsh environments around the world. The full sreened vent openings are "bug-proof" and the die-cast aluminum chassis protects and keeps the power conversion components cool in very hot environments even when operated at high power for extended periods. The GVFX can be used in high ambient applications up to 60oC (with reduced output ratings). The OutBack GVFX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PSDC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display. |
|
|
WE ACCEPT... |
||
|
|
|
If you experience any problems on this site, please help us out by e-mailing us as to what kind of problem you may have experienced. Please let us know on what pages the problem occurred.
OUR POLICY ABOUT YOUR ORDER
Prices have
been unsteady, since the Iraq War and in most cases we have been
able to absorb the difference.
Should there be a price increase, you will be notified
before we ship so you can make a decision as to keep the
purchase or not.
Once we receive your additional payment, we will fulfill your
order.
Should you decide that you do not want to keep the purchase, you
will need to let us know via eMail.
When making a
purchase from this site, shipping charges are normally included
when placing your order..
On some large items such as appliances, batteries, etc. the shipping and
possibly crating fees may be
extra.
These items are noted by an * at the end of the Part Number.
In such case, you will be notified of the extra charges, which
need to be
paid prior to shipping.
ALL WARRANTIES ARE PROVIDED BY THE PRODUCT MANUFACTURERS, WE DO NOT ISSUE THE WARRANTIES.
|
If you are
interested in
quality supplements,
please click on the
above logo. |
|
This
Web Site is Maintained by Taos Artist, Terry Wolff - Artes del
Lobo
Last up-dated on
14 January 2008